Automotive lubricants - Elama B

Passenger vehicle engine oils

HGV engine oils

Tractor oils

Two stroke oils

Gas engine oils

Passenger vehicle engine oils

For the highest requirements

     Zeller+Gmelin has developed a wide range of high-performance engine oils under the brand name Divinol. These correspond totally to modern engine technology. They fulfil all current specifications and classifications and are approved by leading automotive and engine manufacturers.

DIVINOL Multimax USHPD SAE 5W-30 Article-No. 49230
Synthetic fuel-efficient engine oil with the highest quality protective characteristics for the latest truck diesel engines. This oil was specifically developed for the low emission EURO-3 and EURO-4 engines and offers considerable fuel savings and thus favourable economic conditions. For oil change intervals up to 100 000 km.
Specifications: ACEA E4-98; Mercedes-Benz 228.5; VOLVO VDS-II; MAN M3277; SCANIA LDE
Packaging sizes: 200-l, 55-l, 20-l 
 
DIVINOL Multimax Cargo 10W-40 Artikel-Nr. 49760
UHPD-Light oil for utility vehicle diesel engines with very good viscosity temperature behaviour and low vaporisation inclination. Is suited in particular for engines EURO II and EUROIII.
Specifications: API CF; ACEA E3/E4; MAN M 3277
Performance Level: Mercedes-Benz 228.5
Packaging sizes: 200-l, 55-l, 20-l  
 
DIVINOL Multimax Plus SAE 10W-40 Article-No. 49750
is a high-performance diesel engine oil based on synthesis technology developed especially for EURO 4 diesel engines with low sulphate ash, phosphor and sulphur content. It was designed and adjusted to the hardest service conditions in the field of commercial vehicles. To be filled in engines equipped with diesel particle filter (DFP) or catalytic converter (SCR) for use with diesel oil with low sulphur content < 50ppm under difficult service conditions. Prolonged oil-change intervals are possible if the instructions of the respective manufacturers are followed. An excellent cold-start performance prevents engine wear.
Must not be used in spark-ignition engines!
Specifications: MAN M3477, M3277; Mercedes-Benz 228.5 und 228.51
Performance Level:ACEA E6-04, E4-99, Renault VI RXD, MTU Type 3, DAF HP-2, Volvo VDS III, MACKEO-M-Plus
Packaging sizes: 200-l, 55-l, 20-l  
 
DIVINOL Multimax Synth SAE 10W-40 Article-No. 49740
This first class SHPD fuel efficiency engine oil was designed specifically for the new Euro II engines and can be used for maximum oil change intervals up to 90 000 km, according to the manufacturers regulations. It is especially suitable for commercial vehicles, e.g. for haulage operations and public motor pools. This product is not suitable for gasoline/petrol and two stroke diesel engines.
- It offers a fault-free engine operation in extreme conditions,
- reduces fuel consumption,
- effectively prevents formation of bore polishing,
- for transmission parts with high loads
Specifications: API CF; Mercedes-Benz 228.5; ACEA E3/E4/E5/E7; MAN M 3277; VOLVO VDS II
Packaging sizes: 200-l, 55-l, 20-l

DIVINOL Multimax Extra SAE 10W-40 Article-No. 49640
SHPD fuel-efficient engine oil for highly charged diesel engines as well as for gasoline/petrol engines. High degree of additives prevents bore polishing. A modern lubricant that guarantees low friction and a high engine lifetime due to its ideal viscosity temperature behaviour. For oil change intervals up to 45000 km, according to the manufacturer?s recommendations.
Specifications: API CI-4/SL; ACEA E7, E5, E3, B4, B3, A3; MAN 3275; Mercedes-Benz 228.3/229.1; Volvo VDS II; Allison C-4
Performance Level: VW 505.00
Packaging sizes: 200-l, 55-l, 20-l 
 
DIVINOL Multimax High Tech SAE 15W-40 Article-No. 49730
A super high performance diesel (SHPD) engine oil specifically designed for low-emission diesel engines operating in extreme conditions. Also suitable for passenger vehicl gasoline/petrol engines. This engine oil reduces maintenance costs and guarantees the best possible engine cleanliness even under difficult operating conditions.
Specifications: API CI-4/SL, Mercedes-Benz 229.1/228.3, DAF, ACEA A3/B3/B4/E3/E5, E7, MAN M 3275 MTU Type2, IVECO SHPD, Volvo VDS-3, SCANIA, Renault RLD, John Deere JDQ 78A
Packaging sizes: 200-l, 55-l, 20-l 

DIVINOL Multimax Top SAE 15W-40 Article-No. 49720
SHPD oil (super high performance diesel oil) suitable for extended oil change intervals up to 45 000 km (depending on manufacturers regulations). May be used in low emission engines
- Prevents sludge formation
- Good corrosion protection due to high alkaline reserves
- High protection against wear with changing loads
Specifications: API SJ/ CH-4; Mercedes Benz 228.3; ACEA A3/B3/E3/E5-98; MAN M 3275
Packaging sizes: 200-l, 55-l, 20-l 
 
DIVINOL Multimax HD C3 SAE 15W-40 Article-No. 49670
Standard SHPD multigrade oil for the mixed motor pool. The lubricant for the hardest loads in permanent operation with dirt, sand, heat and cold influences. Suitable for oil change intervals up to 45 000 km (depending on manufacturer?s specifications). The universal all-year-round use means simpler storage for you in the mixed motor pool.
Specifications: API SJ/CG-4, ACEA A2/B2/E2, Mercedes-Benz 228.1 und 229.1, MAN 271, Caterpillar TO-2, Allison C-4 / Volvo VDS
Performance Level: VW 501.01 und 505.00
Packaging sizes: 200-l, 55-l, 20-l

HGV engine oils

For extreme loads 
     Modern engines for commercial vehicles and buses make the highest demands on the quality of lubricants. Divinol commercial vehicle engine oils fulfil, even exceed, the required specifications. They guarantee full lubrication and safely even with extreme loads. 

DIVINOL Multimax Cargo 10W-40 Artikel-Nr. 49760
UHPD-Light oil for utility vehicle diesel engines with very good viscosity temperature behaviour and low vaporisation inclination. Is suited in particular for engines EURO II and EUROIII.
Specifications: API CF; ACEA E3/E4; MAN M 3277
Performance Level: Mercedes-Benz 228.5
Packaging sizes: 200-l, 55-l, 20-l 

DIVINOL Multimax USHPD SAE 5W-30 Article-No. 49230 
Synthetic fuel-efficient engine oil with the highest quality protective characteristics for the latest truck diesel engines. This oil was specifically developed for the low emission EURO-3 and EURO-4 engines and offers considerable fuel savings and thus favourable economic conditions. For oil change intervals up to 100 000 km.
Specifications: ACEA E4-98; Mercedes-Benz 228.5; VOLVO VDS-II; MAN M3277; SCANIA LDE
Packaging sizes: 200-l, 55-l, 20-l

DIVINOL Multimax Plus SAE 10W-40 Article-No. 49750 
is a high-performance diesel engine oil based on synthesis technology developed especially for EURO 4 diesel engines with low sulphate ash, phosphor and sulphur content. It was designed and adjusted to the hardest service conditions in the field of commercial vehicles. To be filled in engines equipped with diesel particle filter (DFP) or catalytic converter (SCR) for use with diesel oil with low sulphur content < 50ppm under difficult service conditions. Prolonged oil-change intervals are possible if the instructions of the respective manufacturers are followed. An excellent cold-start performance prevents engine wear.
Must not be used in spark-ignition engines!
Specifications: MAN M3477, M3277; Mercedes-Benz 228.5 und 228.51
Performance Level:ACEA E6-04, E4-99, Renault VI RXD, MTU Type 3, DAF HP-2, Volvo VDS III, MACKEO-M-Plus
Gebinde: 200-l, 55-l, 20-l

DIVINOL Multimax Synth SAE 10W-40 Article-No. 49740
This first class SHPD fuel efficiency engine oil was designed specifically for the new Euro II engines and can be used for maximum oil change intervals up to 90 000 km, according to the manufacturers regulations. It is especially suitable for commercial vehicles, e.g. for haulage operations and public motor pools. This product is not suitable for gasoline/petrol and two stroke diesel engines.
- It offers a fault-free engine operation in extreme conditions,
- reduces fuel consumption,
- effectively prevents formation of bore polishing,
- for transmission parts with high loads
Specifications: API CF; Mercedes-Benz 228.5; ACEA E3/E4/E5/E7; MAN M 3277; VOLVO VDS II
Packaging sizes: 200-l, 55-l, 20-l

DIVINOL Multimax Extra SAE 10W-40 Article-No. 49640
SHPD fuel-efficient engine oil for highly charged diesel engines as well as for gasoline/petrol engines. High degree of additives presents bore polishing. A modern lubricant that guarantees low friction values and a long engine life due to the ideal viscosity temperature behaviour. For oil change intervals up to 45 000 km, depending on manufacturer?s specifications.
Specifications: API SJ/ CH-4; ACEA A3/B3/E3-98; Mercedes-Benz 228.3/229.1; MAN 3275, Mercedes-Benz 228.3, 229.1, Renault RVI SHPD D5R, DAF SHPD, Cummins, Scania, Extended Drain, Allison C-4
Packaging sizes: 200-l, 55-l, 20-l

DIVINOL Multimax Top SAE 15W-40 Article-No. 49720 
SHPD oil (super high performance diesel oil) suitable for extended oil change intervals up to 45 000 km (depending on manufacturers regulations).
- May be used in low emission engines
- Prevents sludge formation
- Good corrosion protection due to high alkaline reserves
- High protection against wear with changing loads
Specifications: API SJ/ CH-4; Mercedes Benz 228.3; ACEA A3/B3/E3/E5-98; MAN M 3275
Packaging sizes: 200-l, 55-l, 20-l

DIVINOL Multimax High Tech SAE 15W-40 Article-No. 49730
A super high performance diesel (SHPD) engine oil specifically designed for low-emission diesel engines operating in extreme conditions. Also suitable for passenger vehicl gasoline/petrol engines. This engine oil reduces maintenance costs and guarantees the best possible engine cleanliness even under difficult operating conditions.
Specifications: API CI-4/SL, Mercedes-Benz 229.1/228.3, DAF, ACEA A3/B3/B4/E3/E5, E7, MAN M 3275 MTU
Type2, IVECO SHPD, Volvo VDS-3, SCANIA, Renault RLD, John Deere JDQ 78A
Packaging sizes: 200-l, 55-l, 20-l

DIVINOL Multimax HD C3 SAE 15W-40 Article-No. 49670
Standard SHPD multigrade oil for the mixed motor pool. The lubricant for the hardest loads in permanent operation with dirt, sand, heat and cold influences. Suitable for oil change intervals up to 45 000 km (depending on manufacturer?s specifications). The universal all-year-round use means simpler storage for you in the mixed motor pool.
Specifications: API SJ/CG-4, ACEA A2/B2/E2, Mercedes-Benz 228.1 und 229.1, MAN 271, Caterpillar TO-2, Allison C-4 / Volvo VDS
Performance Level: VW 501.01 und 505.00
Packaging sizes: 200-l, 55-l, 20-l

Tractor oils
 

     High performance oils for universal use in agricultural and forestry machines. Specially recommended for the supply of tractors and construction machines in engines as well as with a common oil circulation system for gears and hydraulics  
 
DIVINOL Multitrac SAE 15W-30 Article-No. 51860
Super Tractor Oil Universal (STOU) for universal use in engine, gears and hydraulics as well as "wet" braking" of tractors and construction machines. Fulfils the requirements of the international tractor and construction machine manufacturers when equipped with special-purpose alloy components.
Specifications: API CF-4/ SF; API GL-4; HLP DIN 51524 part 2; HVLP DIN 51524 part 3
Packaging sizes: 200-l, 55-l, 20-l 
 
DIVINOL Syntrac TS SAE 10W-40 Article-No. 51910
Partly synthetic Super Tractor Oil Universal (STOU) for the standardised supply of aggregates in agricultural appliances and construction machines equipped with engine or petrol/gasoline engines. May be used in construction and agricultural machines as a fuel-efficient engine oil, gear oil, multi-grade oil and as a brake fluid for hydraulic brakes.
Specifications: API CF-4/ SG, GL-4, GL-5; HLP-D DIN 51524 part 2; HVLP DIN 51524 part 3
Packaging sizes: 200-l, 55-l, 20-l 
 
DIVINOL Spezialöl HGB Article-No. 51880
STOU high performance oil for universal use (SAE 10W-30) in agricultural and forestry machines. Specially suitable for the supply of farming tractors and construction machines in engines as well as for the common oil circulation system for gear/axle drives (API GL 4) and hydraulic installations (UTTO).
Packaging sizes: 200-l, 55-l, 20-l 
 
DIVINOL Spezialöl HGB V-R
Article-No. 52040
Universal high-performance oil specifically for supplying construction machines, tractors and other agricultural machines with common oil circulation system for gear / axle drive (API GL 4) and hydraulic installations (UTTO).
Packaging sizes: 200-l, 55-l, 20-l

Two stroke oils

     Two stroke oils for mixed and separate lubrication for two stroke engines of all makes and the highest requirements.  
 
DIVINOL Synthetic 2T Article-No. 49490
Self-mixing high-performance two stroke oil with the latest synthesis technology for highest performance requirements in petroil and separate lubricating systems (fresh oil automatic). Mixing ratio up to 1:100, or 1:50 on outboard motors and 2 stroke carts (please observe the manufacturers specifications).
- prevents the exhaust system blocking up
- reduces deposits and ensures reduced exhaust smoke
- excellent protection against corrosion
- good bearing and cylinder lubrication
- free from ash
Specifications: API TC, JASO FC
Packaging sizes: 200-l, 55-l, 20-l, 5-l, 1-l 
 
DIVINOL Zweitaktöl S Article-No. 48300
Self-mixing synthetic universal two-stroke engine oil with cleaning and corrosion preventive active ingredients for separate and petroil lubrication for all makes of air and water cooled two stroke engines. Emulsifying agents guarantee an automatic and even mixing with the fuels. Suitable for mixing ratios up to 1:50, depending on manufacturers specifications.
Specification: API TC; JASO FC; GLOBAL GD; Piaggio SI
Packaging sizes: 200-l, 55-l, 20-l, 5-l, 1-l, 250-ml, 100-ml

Gas engine oils

DIVINOL Zweitaktöl S Article-No. 48300
Self-mixing synthetic universal two-stroke engine oil with cleaning and corrosion preventive active ingredients for separate and petroil lubrication for all makes of air and water cooled two stroke engines. Emulsifying agents guarantee an automatic and even mixing with the fuels. Suitable for mixing ratios up to 1:50, depending on manufacturers specifications. Specification: API TC; JASO FC; GLOBAL GD; Piaggio SIPackaging sizes: 200-l, 55-l, 20-l, 5-l, 1-l, 250-ml, 100-ml

DIVINOL Spezial HA SAE 40 Article-No. 49300
is a gas engine oil with a high sulphate-ash content. Guarantees good lubrication and protects the engine from abrasion and corrosion.
Corresponds to the following manufacturer specifications:
API CD, Jenbacher AG, Deutz AG (MWM)
Packaging sizes: 20-l, 55-l, 200-l, open in a tank car  
 
DIVINOL Spezial MA SAE 40 Article-No. 49290
is a gas engine oil with medium sulphate ash content. It reduces costs by low consumption and can be used for all tyes of gas engines. It provides excellent lubrication and protects the engine from wear and corrosion. A further advantage is its good exidation and heat resistance.
Corresponds to the performance requirements of following manufacturer specifications: API CD, Jenbacher AG, Deutz AG (MWM), MAN 3271-2, MDE, Enmaco, Ficantieri, Waukesha, Wartsila, Rolls Royse Bergen
Packaging sizes: 20-l, 55-l, 200-l, open in a tank car